Viper S Series Rapid 1000 Winch Bundle 100m Rope

Viper S Series Rapid 1000 all stainless winch bundle with 100m rope and chain kit. This bundle includes 100m double braid rope spliced to 8 meters of 600 short link galvanised anchor chain and includes a 316 stainless steel marine gearbox and motor with IP68 waterproof certifications and an Emergency Manual Release Safety Feature.

The Viper “S” Series RAPID has set new standards in anchoring systems. The new Viper 1000W electric motor (hand polished marine 316 grade stainless steel) has made it one of best selling anchor winch in Australia. With a fall rate of 50 meters per minute and a retrieval rate of 45 meters per minute the Viper will ensure you get onto your GPS mark, first time, every time!

Now includes an Emergency Manual Release Safety Feature. This feature enables you to deploy your anchor if your boat has lost all power and is heading for a cliff, sand bank or a bar crossing, you can lower your anchor without power. Making sure you can safely anchor your boat avoiding dangerous drifting into a hazardous location. The winch will allow the anchor to release to the seabed. Once the anchor is on the bottom, tie your rope to a bollard to be safely anchored. Then you can call the coast guard or your local emergency marine service.

With unsurpassed Viper reliability, it has more torque than a conventional drum winch, 3 support bearings hugging a 28mm one (1) piece solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum (preventing rope jams) and does not require any additional guards.

With a bullet proof 5-year Viper performance warranty, you can’t go past a Viper. Now supplied with everything you need to install it, including a 5mm stainless steel sandwich plate, all required stainless steel bolts/screws/nylocs/washers, 2 face plates depending on your dash space and even your rope chain and even swivel are included.

The Viper “S” Series RAPID 1000 All Stainless Steel Anchor Winch Bundle also Inc 100 meters of 6mm Double Braid Rope, Pre-Spliced to 8 meters of 6mm Gal Short Link Anchor Chain (Total 108 meters Rope/Chain).

Specifications:

• 1000W Submersible Stainless Steel Electric Motor with IP68 Certification
• 28mm Solid S/S Shaft With 3 Support Bearings
• 8mm Marine Grade 316 Plate S/S Hand Polished to a Mirror Finish
• Viper 316 Stainless Steel Marine Worm Drive Gear Box
• 360 Degree Motor Rotation with 16 Different Positions
• Max fall rate: 50 meters per minute
• Max Retrieval rate: 45 meters per minute
• Suit Vessel Length: 5.7 meters +
• Weight: 17 kgs (winch only)
• Well Clearance Required: Width 395mm x depth 410mm x height 260mm

Bundle Includes:

• Viper "S" Series 1000 All Stainless Steel anchor winch supplied with 1 mtr 3 b&s power leads & joining connectors, pressure tested & sealed
• 100 meters Of 6mm Double Braid Rope Spliced To 8 meters Of 6mm Short Link Chain
• Viper pro series anchor swivel - small
• Viper deluxe anchor roller - small
• 200 amp reversing solenoid
• LED illuminated marine rocker switch
• Viper laser etched led illuminated switch cover
• 100 amp flush mount circuit breaker with rubber seal
• Single LED switch stainless steel face plate
• Combo LED switch & circuit breaker S/S face plate
• 5mm stainless steel sandwich plate
• All fixing hardware
• Installation notes & wiring diagram